 |
SALLEE CHRVROLET - MSD PONTIAC V8 PRO-BILLET READY-TO-RUN DISTRIBUTOR | |
|
|
||||||||||||||||
|
WEB SITE NAVIGATION | |
|
GM & SC HOLLEY AFR |
EDELBROCK FLUIDAMPR R&M |
SCAT MSD |
DEMON WORLD |
HUGHES TREMEC |
RICHMOND PROFORM |
 |
 |
|
|
MSD IGNITION NAVIGATION | |
|
|
|
|
MSD PONTIAC V8 PRO-BILLET READY-TO-RUN DISTRIBUTOR PICTURES | |
 |
|
|
|
|
MSD PONTIAC V8 PRO-BILLET READY-TO-RUN DISTRIBUTOR DESCRIPTION | |
| MSD P/N 8528 |
|
|
MSD Pontiac Pro-Billet Ready-To-Run Distributor (1965 and up V8 Applications) Do yourself a favor and replace your old Pontiac points distirbutor with this new Pontiac Ready-to-Run Pro-Billet model. You will never have to adjust or replace the points again and car will run better thanks to the hot MSD sparks. Inside the CNC machined billet housing there is an ignition module that produces a much hotter spark which will improve the performance of your engine. Also, since timing advance is important to Pontiac engines, the mechanical advance can easily be adjusted with the supplied advance springs and stop bushings. Plus, there’ a vacuum advance canister to help with moderate cruise speeds. Triggering the module is the responsibility of a magnetic pickup that will never wear or require adjusting. A reluctor wheel that is attached to the QPQ coated steel shaft creates a trigger signal every time on of its tabs pass the pickup. This shaft is supported with a ball bearing guide resulting in terrific high rpm stability. The Ready-to-Run distributor is easy to wire with only three wires! If you are determined to keep your engine looking stock, you could even remove the high quality MSD cap and clip a stock unit in place. You’ll have MSD performance and no one will be the wiser! Replacement Parts: Distributor Cap: P/N 8433, P/N 8437 (Socket) Distributor Rotor: P/N 8467 CAP-A-DAPT: P/N 7445, P/N 8445 Distributor Gear: P/N 85631 (Bronze) |
|
|
|