Posted by Dave on January 24, 1999 at 23:57:57:
In Reply to: Re: 6 speed posted by paul on January 23, 1999 at 12:38:22:
Paul, you could have used the stock camaro flywheel that came with the T56 if you had a one-piece rear main seal motor (86 and up). I have an article around my house somewhere from an ALL CHEVY that did it exactly how you want, by using all of the factory T56 pieces. In your case, you will need a new flywheel from McCleod or Centerforce with allows you to use the T56 style clutch. As far as the crossmember and the torque arm, you will need a new crossmember. I don't remember about what mods are necessary for the torque arm. But there is a good article about the swap at www.thirdgen.org in its tech article section. There is even someone selling a new crossmember specifically for this swap.
Hope this helps.