Please make sure you have your e-mail address on all of your messages sent to us.
If you have been told by your local dealer that a stock part has been
discontinued, asking us the same question will not change that fact.
The GM high performance
discussion board
is mainly for our customers to get
together and communicate, but it is also for communication
with us.
...
Chevrolet and GM Performance Parts - GM and Chevrolet and GM Performance Parts Performance Crate Engines
Chevrolet - GM AND Chevrolet PERFORMANCE CRATE ENGINES
These are GMPP crate engines or built up engines by Chevrolet’s Race Shop. We can custom build crate
engines for your specific application needs. If you don’t see what you are looking for, call us on our toll free 1-800 number.
Keys - scperformanceeng, gmperformanceeng, or gmgoodwrencheng for SC, GM, or Goodwrench engines. Use allengine for a complete list of all three.
WEB SITE NAVIGATION INFORMATION
If you have you just came from a search engine and are stuck with no navigation, turn on Java Scripts in your Web browser, reload the page, then you can turn off Java Scripts again. Also, people using Internet Explorer have to use the pull down tab next to the back button to return to a search engine. More information on this is on our help page.
GM and Chevrolet part prices are in the Price & Parts search. Keys are to be used with the Price & Parts Search. Enter a Key, part number, GM, SC, or a key word, like 502, into the Price & Parts search to see if we have it on our site. Use GM for a list of both GM and GMPP parts. Use SC for a list of all Chevrolet exclusive parts. Aftermarket company prices are on downloadable Price Sheets or on their pages. The Page Search is for searching the pages of our Web site. More information on this is on our help page.
GM AND Chevrolet PERFORMANCE CRATE ENGINES
Most of the parts listed on this page are for off road use only!
They DO NOT pass emission laws in most locations.
Check your Local, State or Regional, and Country laws for rules.
Click on (Page) for information page on an engine.
There are no core charges on these engines. All engines are brand new crate engines.
These are not Turnkey or Factory engines with everything need on an engine.
For Turnkey performance engines, you will have to call us for what you will need with these.
We can supply the pulleys, brackets, wiring, and all other parts needed for a complete Turnkey engine.
Chevrolet’s Engines are at the bottom of this page.
Use these links for GM Goodwrench Stock Replacement Long-Block engines, GMPP Partial engines, Bare Blocks, and other GM, GMPP, & Chevrolet Parts:
3.4 V6 engine conversion package. Designed to replace 82-85 S-10 pickups and Blazers. 40 HP more then the 2.8. Horsepower 160 @ 5,000 RPM, Torque 194lbs. @ 2700 RPM, Requires additional parts for installation.
330HP 350 HO Turnkey (330 HP @ 5000 RPM), Includes Deluxe Serpentine Accessory Belt Drive System
--
24502609
High Output 350 ZZ4 (355 HP). Chevrolet has many power upgrades available for the ZZ4 crate engine. See below in the Chevrolet engine section for more information.
LT4 engine kit. Includes water pump, distributor, special intake manifold, and lower pulley. (Discontinued) Page is still available for information only.
2004 Corvette LS6 [Old discontinued part numbers: 2001 (12561150), 2002 (12562181), 2003 (12562190)] Note: Every year GM changes the part number on these engines and discontinues the old part number. Most of the time there is very little changed on the actual engine itself. We keep the old part numbers listed for reference only. This is a big help to people looking for a replacement engine for the one they currently have or for replacement parts.
Note: These crate engines are produced and assembled by Chevrolet’s race shop. They are assembled on demand as ordered and are not assembled ahead of time. They have to be scheduled for our Race Shop to do. Call and talk to Tom Sallee about what the current wait time would be using our toll free phone number. The Chevrolet Race Shop can also put together turnkey engines for you but again you will have to call and talk to Tom Sallee to get a price quote and an approximate start and completion date.
